X4-Z11-E-W
Digi X4-Z11-E-W, ConnectPort X4 - XBee ZigBee to Ethernet (International)
Digi X4-Z11-E-W, ConnectPort X4 - XBee ZigBee to Ethernet (International)
|
X4-Z11-E-W
|
|
|
Wireless Interfaces |
|
|
WWAN |
|
|
LTE CAT1 |
N/A |
|
HSPA+ (U9) |
850/900/1700 (AWS)/1900/2100 MHz; |
|
Connector |
1 or 2 x SMA (center pin - on device: female; on antenna: male) |
| SIM SLOTS |
2 |
|
SIM Security |
SIM slot cover plate |
|
RF |
|
|
Standard |
Zigbee® (2.4 GHz) |
|
Connector |
1 x RP-SMA (center pin - on device: male; on antenna: female) |
|
Wired Interfaces |
|
|
Serial |
|
|
Ports |
1 |
| Standard |
RS-232 |
|
DTE/DCE |
DTE |
| Signal Support |
TXD, RXD, RTS, CTS, DTR, DSR and DCD |
| Flow Control |
Hardware and software flow control |
|
Com Port Redirector |
RealPort® |
|
Throughput |
Up to 230 Kbps |
|
Connector |
DB-9 Male |
| Ethernet | |
| Ports |
1 |
| Standard |
IEEE 802.3 |
| Physical Layer |
10/100 Base-T |
| Data Rate |
10/100 Mbps (auto-sensing) |
|
Mode |
Full or half duplex (auto-sensing) |
|
Interface |
Auto MDI/MDIX |
|
Connector |
RJ-45 |
|
I/O |
|
|
Ports |
N/A |
|
Connector |
N/A |
| USB | |
|
Ports |
1 |
|
Standard |
USB 1.1 |
|
Signaling |
Full-speed |
|
Connector |
Type A |
|
Software / Management |
|
|
Remote Management |
Digi Remote Manager® |
|
Local Management |
Web Interface via HTTP/HTTPS, password access control, IP service port control; CLI via serial port, Telnet, Python scripting (2.4.3); Digi SureLink® "always-on" connection |
|
Security |
SSL tunnels, SSHv2, FIPS 197 (IPsec, HTTPS) |
|
Software / Management (Continued) |
|
|
Network Protocols |
UDP/TCP, DHCP, SNMPv1/v2 |
|
VPN |
IPsec with IKE/ISAKMP; multiple tunnel support; DES, 3DES and up to 256-bit AES encryption; VPN pass-through, GRE forwarding; Simple Certificate Enrollment Protocol (SCEP) for X.509 certificate |
|
Routing |
NAT, NAT-T (NAT traversal) VPN tunneling, port forwarding, VPN/GRE pass-through; access control lists (IP filtering), IP pass-through, Virtual Router Redundancy Protocol (VRRP) per RFC 3768 |
|
Industrial Protocol Support |
Modbus server/slave; functions like an Ethernet to serial bridge, but uses Digi XBee® to transport serial data; handles unique timing issues per Modbus protocol rules; uses Modbus Unit ID to look up IP or mesh MAC address |
|
Real-Time Clock |
Yes |
|
Memory |
16 MB Flash, 32 MB RAM |
|
Power |
|
|
Input |
6-30 VDC |
|
Consumption |
Idle: 1.5 W, Max: 10.4 W |
|
Protection |
4 kV burst (EFT) per-4-4, 2 kV surge per EN61000-4 |
|
Connector |
Locking barrel |
|
DC Power Cord* |
Available upon request |
|
AC Power Supply* |
12 VDC power supply for 0º C to 40º C (32º F to 104º F) included; extended temperature power supply available separately |
|
Battery Backup |
N/A |
|
Physical |
|
|
Dimension (L x W x H) |
13.33 cm x 8.50 cm x 2.54 cm (5.25 in x 3.35 in x 1.00 in) |
|
Weight |
0.20 kg (0.44 lb) |
|
Status LEDs |
Ethernet status, power, cellular link/activity, signal strength (4 bars),Digi XBee link/activity |
|
Enclosure Material |
Industrial (metal) |
|
Enclosure Rating |
N/A |
|
Mounting |
Wall-mount bracket sold separately |
|
Environmental |
|
|
Operating Temperature*** |
-30º C to 75º C (-22º F to 167º F) |
|
Storage Temperature |
-40º C to 85º C (-40º F to 185º F) |
|
Relative Humidity |
5% to 95% (non-condensing) |
|
Ethernet Isolation |
1500 VAC min per IEEE 802.3/ANSI X3.263 |
|
Serial Port Protection (ESD) |
+15 kV Air Gap and +8 kV contact discharge per IEC 1000-4-2 |
|
Hazardous (Class 1 DIV 2) |
No |
|
Approvals |
|
|
GSM / UMTS |
PTCRB, NAPRD.03, GCF-CC, R&TTE, EN 301 511 |
|
Cellular Carriers |
Certified by most major carriers; visit www.digi.com/resources/certifications for latest cellular certifications |
|
Safety |
UL 60950, CSA 22.2 No. 60950, EN62368; Class 1 Div 2 (IA model only) |
|
Emissions / Immunity |
CE, FCC Part 15 (Class A), AS/NZS CISPR 22, EN55024, EN55032, Class A |
|
Warranty |
|
|
Product Warranty |
3 Year |
